-
fix ethernet TX firmware: pad packet with zeros to reach size divisible by 4 (TX cannot deal with other sizes)
Stefan Schuermans authored on 2012-03-19 23:32:26
-
implementation of ethernet and ARP (not completely working yet, hangs on received ARP request)
Stefan Schuermans authored on 2012-03-17 01:03:19
-
made MAC configurable in ethernet peripheral
Stefan Schuermans authored on 2012-03-11 20:48:30
-
improve synchonous FIFO implementation (get rid of delays between reads)
Stefan Schuermans authored on 2012-03-11 18:59:11
-
replaced ethernet RX clock domain crossing interface with dual clock FIFO
Stefan Schuermans authored on 2012-03-10 17:43:57
-
fixed uninitialized / not resetted frame done output of ethernet TX frame processing
Stefan Schuermans authored on 2012-03-10 10:56:08
-
send ethernet packet on center button press
Stefan Schuermans authored on 2012-03-07 21:52:08
-
adapt ethernet TX clock timing constraint to transmission of data on falling edge
Stefan Schuermans authored on 2012-03-07 21:18:54
-
transmit data on falling edge of ethernet TX clock
Stefan Schuermans authored on 2012-03-07 21:15:19
-
implemented ethernet RX packet and TX clock in testbed
Stefan Schuermans authored on 2012-03-06 20:48:33
-
implemented ethernet TX interface (not tested yet)
Stefan Schuermans authored on 2012-03-04 21:38:35
-
implemented ethernet RX busmaster -> packet reception working
Stefan Schuermans authored on 2012-03-03 23:42:55
-
converted core to use req and grant signals to access data bus
Stefan Schuermans authored on 2012-03-01 21:23:47
-
changed MIPS core to use read and write ack instead of stall input
Stefan Schuermans authored on 2012-02-29 21:28:37
-
shortcut to switch between HW and simulation config
Stefan Schuermans authored on 2012-02-29 21:28:34
-
add read_enable signal to data bus and some peripherals
Stefan Schuermans authored on 2012-02-26 21:20:53
-
fix reading (1 cycle latency) from ethernet peripheral
Stefan Schuermans authored on 2012-02-26 18:26:02
-
removed bottleneck from data bus implementation, now meets timing even with keep_hierarchy
Stefan Schuermans authored on 2012-02-21 20:40:30
-
begin of ethernet RX implementation, so far only test interface to core, does not meet timing
Stefan Schuermans authored on 2012-02-20 21:16:03
-
increased code and data address range to 8KB
Stefan Schuermans authored on 2012-02-20 15:55:19
-
fixed instruction word input on stall, fixed uninitialized instruction word after reset by stalling 1 cycle
Stefan Schuermans authored on 2012-02-16 20:09:51
-
implemented displaying rotary counter (octal)
Stefan Schuermans authored on 2012-02-12 21:51:32
-
read peripherals with one cycle delay - as for memory
Stefan Schuermans authored on 2012-02-12 19:10:11
-
converted code to use constants in data memory
Stefan Schuermans authored on 2012-02-12 18:24:53
-
implemented loading of data memory from firmware
Stefan Schuermans authored on 2012-02-12 17:47:50
-
slower LED animation for execution on FPGA
Stefan Schuermans authored on 2012-02-11 00:31:59
-
clock and reset constraints are for whole system
Stefan Schuermans authored on 2012-02-10 23:22:30
-
if not comparing, jump is unconditional, so compare must return true
Stefan Schuermans authored on 2012-02-10 22:45:59
-
implented basic system with core, instr memory, data memory
Stefan Schuermans authored on 2012-02-06 21:28:00
-
second version of multiplier (slower, i.e. more stages -> faster clock)
Stefan Schuermans authored on 2012-02-05 21:39:45
-
implemented ... and link -> MIPSel1 core complete
Stefan Schuermans authored on 2012-02-05 21:16:11
-
decoding MULT(U)/DIV(U) -> MIPSel1 decoder complete
Stefan Schuermans authored on 2012-02-05 17:32:53
-
implemented simple store instructions, preparations for load instructions
Stefan Schuermans authored on 2012-02-05 13:58:17
-
implemented "register 0 is always 0" in a faster way
Stefan Schuermans authored on 2012-01-26 21:17:30
-
implement jump logic, implement instruction fetch
Stefan Schuermans authored on 2012-01-25 23:17:28
-
implement correctly writing to register file
Stefan Schuermans authored on 2012-01-24 21:52:18
-
start of MIPS core: begin of decoder and ALU
Stefan Schuermans authored on 2012-01-23 22:06:18