# FlexiPix configuration file for screen with 5x2 panels of 8x12 pixels each
# address of local output socket
# all distributors must be reachable from this address
# syntax:
# bindAddr = <IPv4>:<port>
# description:
# IPv4: IPv4 address, 0.0.0.0 for all local interfaces
# port: UDP port number, 0 for automatic selection
bindAddr = 0.0.0.0:0
# size of the (virtual) rectangluar display
# syntax:
# size = <width>,<height>
# description:
# width: width in pixels
# height: height in pixels
size = 40,24
# configure distributors
# syntax:
# distributor <distno> = <outputs>,<pixels>
# description:
# distno: number of distributor
# outputs: number of outputs per distributor
# pixels: number of pixels per output
distributor 0 = 32,96
# set address of distributor
# if address is not set, default IP/UDP configuration is used:
# IPv4: 10.70.80.<distno>
# UDP port: 2323
# syntax:
# distributorAddr = <IPv4>:<port>
# description:
# IPv4: IPv4 address
# port: UDP port number
distributorAddr 0 = 192.168.0.111:2323
# configure mapping between the color channel values in the video
# and the values transmitted to the display
# a mapping is configured per distributor and applies to all pixels
# connected to it
# syntax:
# mapping <distno> (red|green|blue) = <base> <factor> <gamma>
# description:
# distno: number of distributor
# base, factor, gamma: floating-point values used in formula
# mapping formula:
# display := base + factor * video ** (1.0 / gamma)
# description:
