"""
Exporting of GNU PCB files to DXF.
"""

import ezdxf
import sys

import pcb_types


class DxfFootprintWriter():
    """
    Writer for DXF files from GNU PCB footprints.
    """

    def __init__(self):
        self._doc = ezdxf.new('R12')
        self._msp = self._doc.modelspace()
        self._layers = {}
        self._addLayer('clearance', 8)  # gray
        self._addLayer('hole_drill', 3)  # green
        self._addLayer('mask', 16)  # dark red
        self._addLayer('name', 7)  # white
        self._addLayer('number', 7)  # white
        self._addLayer('pin_copper', 1)  # red
        self._addLayer('pin_drill', 5)  # blue
        self._addLayer('silk_center', 2)  # yellow

    def _addCircle(self, x: pcb_types.Coordinate, y: pcb_types.Coordinate,
                   d: pcb_types.Coordinate, layer_name: str):
        self._msp.add_circle((x.mm, -y.mm),
                             radius=d.mm / 2,
                             dxfattribs={'layer': layer_name})

    def _addOctagon(self, cx: pcb_types.Coordinate, cy: pcb_types.Coordinate,
                    size: pcb_types.Coordinate, layer_name: str):
        l = size.mm / 2
        s = l / (1 + 2**.5)
        points = [(cx.mm - s, -cy.mm - l), (cx.mm + s, -cy.mm - l),
                  (cx.mm + l, -cy.mm - s), (cx.mm + l, -cy.mm + s),
                  (cx.mm + s, -cy.mm + l), (cx.mm - s, -cy.mm + l),
                  (cx.mm - l, -cy.mm + s), (cx.mm - l, -cy.mm - s),
                  (cx.mm - s, -cy.mm - l)]
        self._msp.add_polyline2d(points, dxfattribs={'layer': layer_name})

    def _addSquare(self, cx: pcb_types.Coordinate, cy: pcb_types.Coordinate,
                   size: pcb_types.Coordinate, layer_name: str):
        points = [(cx.mm - size.mm / 2, -cy.mm - size.mm / 2),
                  (cx.mm + size.mm / 2, -cy.mm - size.mm / 2),
                  (cx.mm + size.mm / 2, -cy.mm + size.mm / 2),
                  (cx.mm - size.mm / 2, -cy.mm + size.mm / 2),
                  (cx.mm - size.mm / 2, -cy.mm - size.mm / 2)]
        self._msp.add_polyline2d(points, dxfattribs={'layer': layer_name})

    def _addLayer(self, name: str, color: int = 7):
        if name in self._layers:
            return
        self._layers[name] = self._doc.layers.new(name=name,
                                                  dxfattribs={
                                                      'linetype': 'Continuous',
                                                      'color': color
                                                  })

    def _addLine(self, x1: pcb_types.Coordinate, y1: pcb_types.Coordinate,
                 x2: pcb_types.Coordinate, y2: pcb_types.Coordinate,
                 layer_name: str):
        self._msp.add_line((x1.mm, -y1.mm), (x2.mm, -y2.mm),
                           dxfattribs={'layer': layer_name})

    def _addText(self,
                 x: pcb_types.Coordinate,
                 y: pcb_types.Coordinate,
                 t: str,
                 layer_name: str,
                 height: pcb_types.Coordinate = None,
                 align: str = None):
        dxfattribs = {'layer': layer_name}
        if height is not None:
            dxfattribs['height'] = height.mm
        text = self._msp.add_text(t, dxfattribs=dxfattribs)
        kwargs = {}
        if align is not None:
            kwargs['align'] = align
        text.set_pos((x.mm, -y.mm), **kwargs)

    def _drawHole(self, pin: pcb_types.Pin):
        self._addCircle(pin.r_x, pin.r_y, pin.drill, 'hole_drill')
        self._addCircle(pin.r_x, pin.r_y, pin.thickness + pin.clearance,
                        'clearance')
        self._addCircle(pin.r_x, pin.r_y, pin.mask, 'mask')
        self._drawNameNumber(pin.r_x,
                             pin.r_y,
                             pin.name,
                             pin.number,
                             height=pin.drill / 2)

    def _drawNameNumber(self,
                        x: pcb_types.Coordinate,
                        y: pcb_types.Coordinate,
                        name: str,
                        number: str,
                        height: pcb_types.Coordinate = None):
        self._addText(x, y, name, 'name', height=height, align='BOTTOM_CENTER')
        self._addText(x,
                      y,
                      number,
                      'number',
                      height=height,
                      align='TOP_CENTER')

    def _drawPinOctagon(self, pin: pcb_types.Pin):
        self._addOctagon(pin.r_x, pin.r_y, pin.thickness, 'pin_copper')
        self._addCircle(pin.r_x, pin.r_y, pin.drill, 'pin_drill')
        self._addOctagon(pin.r_x, pin.r_y, pin.thickness + pin.clearance,
                         'clearance')
        self._addOctagon(pin.r_x, pin.r_y, pin.mask, 'mask')
        self._drawNameNumber(pin.r_x,
                             pin.r_y,
                             pin.name,
                             pin.number,
                             height=pin.drill / 2)

    def _drawPinRound(self, pin: pcb_types.Pin):
        self._addCircle(pin.r_x, pin.r_y, pin.thickness, 'pin_copper')
        self._addCircle(pin.r_x, pin.r_y, pin.drill, 'pin_drill')
        self._addCircle(pin.r_x, pin.r_y, pin.thickness + pin.clearance,
                        'clearance')
        self._addCircle(pin.r_x, pin.r_y, pin.mask, 'mask')
        self._drawNameNumber(pin.r_x,
                             pin.r_y,
                             pin.name,
                             pin.number,
                             height=pin.drill / 2)

    def _drawPinSquare(self, pin: pcb_types.Pin):
        self._addSquare(pin.r_x, pin.r_y, pin.thickness, 'pin_copper')
        self._addCircle(pin.r_x, pin.r_y, pin.drill, 'pin_drill')
        self._addSquare(pin.r_x, pin.r_y, pin.thickness + pin.clearance,
                        'clearance')
        self._addSquare(pin.r_x, pin.r_y, pin.mask, 'mask')
        self._drawNameNumber(pin.r_x,
                             pin.r_y,
                             pin.name,
                             pin.number,
                             height=pin.drill / 2)

    def drawElementLine(self, element_line: pcb_types.ElementLine):
        """
        Draw element line to DXF.
        """
        self._addLine(element_line.r_x1, element_line.r_y1, element_line.r_x2,
                      element_line.r_y2, 'silk_center')
        # TODO element_line.thickness
        # TODO element_line.s_flags onsolder

    def drawFootprint(self, fp: pcb_types.Element):
        """
        Draw footprint to DXF.
        """
        # draw entities in header
        # TODO
        # draw entities in body
        type2method = {
            pcb_types.ElementLine: self.drawElementLine,
            pcb_types.Pin: self.drawPin
        }
        for entity in fp.body:
            try:
                method = type2method[type(entity)]
                method(entity)
            except KeyError:
                # TODO
                print(
                    'warning: ignoring unknown entity of'
                    f' type {type(entity).__name__:s}',
                    file=sys.stderr)

    def drawPin(self, pin: pcb_types.Pin):
        """
        Draw pin to DXF.
        """
        if 'hole' in pin.s_flags:
            return self._drawHole(pin)
        if 'octagon' in pin.s_flags:
            return self._drawPinOctagon(pin)
        if 'square' in pin.s_flags:
            return self._drawPinSquare(pin)
        return self._drawPinRound(pin)

    def writeDxf(self, file_name: str):
        """
        Write DXF file.
        """
        self._doc.saveas(file_name)