fw/main.c (d05a5bb) - mips_sys · BlinkenArea

main.c

#include "arp.h"
#include "cyc_cnt.h"
#include "eth.h"
#include "ip.h"
#include "lcd.h"
#include "leds.h"
#include "switches.h"
#include "uart.h"
#include "udp.h"

unsigned char leds_val = 0x88;

void uint2digits(unsigned int uint, unsigned int cnt, char digits[])
{
  while (cnt > 0) {
    --cnt;
    digits[cnt] = '0' + uint % 10;
    uint /= 10;
  }
}

void switches(void)
{
  char cnt_digits[4];

lcd_chr(1, 0, switches_get_state(sw_0) ? '0' : ' ');
  lcd_chr(1, 1, switches_get_state(sw_1) ? '1' : ' ');
  lcd_chr(1, 2, switches_get_state(sw_2) ? '2' : ' ');
  lcd_chr(1, 3, switches_get_state(sw_3) ? '3' : ' ');
  lcd_chr(1, 4, switches_get_state(sw_east) ? 'E' : ' ');
  lcd_chr(1, 5, switches_get_state(sw_north) ? 'N' : ' ');
  lcd_chr(1, 6, switches_get_state(sw_south) ? 'S' : ' ');
  lcd_chr(1, 7, switches_get_state(sw_west) ? 'W' : ' ');
  lcd_chr(1, 8, switches_get_state(sw_center) ? 'C' : ' ');
  lcd_chr(1, 9, switches_get_state(sw_rot_a) ? 'a' : ' ');
  lcd_chr(1, 10, switches_get_state(sw_rot_b) ? 'b' : ' ');

uint2digits(switches_get_rot_cnt(), 4, cnt_digits);
  lcd_chr(1, 12, cnt_digits[0]);
  lcd_chr(1, 13, cnt_digits[1]);
  lcd_chr(1, 14, cnt_digits[2]);
  lcd_chr(1, 15, cnt_digits[3]);
}

void uart(void)
{
  unsigned short chr;

while (uart_can_rx()) {
    chr = uart_rx();
    if (!uart_is_err(chr))
      uart_tx(chr);
  }
}

void eth_task(void)
{
  void *vptr;
  unsigned int sz, i;
  char digits[2];

while (eth_rx(&vptr, &sz))
    ethernet_recv(vptr, sz);

uint2digits(eth_rx_get_cnt(), 2, digits);;
  lcd_chr(0, 11, digits[0]);
  lcd_chr(0, 12, digits[1]);
  uint2digits(eth_tx_get_cnt(), 2, digits);;
  lcd_chr(0, 14, digits[0]);
  lcd_chr(0, 15, digits[1]);
}

void tasks(void)
{
  switches();
  uart();
  eth_task();
}

void leds_tick200(void)
{
  leds_val = leds_val << 1 | leds_val >> 7;
  leds_set_state(leds_val);
}

void tick200(void)
{
  leds_tick200();
  arp_tick200();
  ip_tick200();
  udp_tick200();
}

int main()
{
  unsigned int start_cyc;

leds_set_state(0x01);

eth_mac_init();
  eth_rx_init();
  eth_tx_init();

leds_set_state(0x02);

lcd_init();
  lcd_str(0, "MIPS I");
  lcd_str(1, "");

leds_set_state(0x04);

uart_cfg_scale(62); /* 115200 */
  uart_cfg_bits(8);
  uart_cfg_stop(1);
  uart_tx('M');
  uart_tx('I');
  uart_tx('P');
  uart_tx('S');
  uart_tx(' ');
  uart_tx('I');
  uart_tx('\r');
  uart_tx('\n');

leds_set_state(0x08);

arp_init();
  ip_init();

leds_set_state(0x10);

while (1) {
    start_cyc = cyc_cnt_read();
    while (cyc_cnt_read() - start_cyc < 200 * CYC_CNT_MS)
      tasks();
    tick200();
  }

return 0;
}

mips_sys

nicer output on LCD: decimal numbers