libetherpix

examples/config/5x2panels8x12.etp  1) # EtherPix configuration file for screen with 5x2 panels of 8x12 pixels each

examples/config/5x2panels8x12.flp  2) 
examples/config/5x2panels8x12.flp  3) # address of local output socket
examples/config/5x2panels8x12.flp  4) # all distributors must be reachable from this address
examples/config/5x2panels8x12.flp  5) # syntax:
examples/config/5x2panels8x12.flp  6) #   bindAddr = <IPv4>:<port>
examples/config/5x2panels8x12.flp  7) # description:
examples/config/5x2panels8x12.flp  8) #   IPv4: IPv4 address, 0.0.0.0 for all local interfaces
examples/config/5x2panels8x12.flp  9) #   port: UDP port number, 0 for automatic selection
examples/config/5x2panels8x12.flp 10) bindAddr = 0.0.0.0:0
examples/config/5x2panels8x12.flp 11) 
examples/config/5x2panels8x12.flp 12) # size of the (virtual) rectangluar display
examples/config/5x2panels8x12.flp 13) # syntax:
examples/config/5x2panels8x12.flp 14) #   size = <width>,<height>
examples/config/5x2panels8x12.flp 15) # description:
examples/config/5x2panels8x12.flp 16) #   width: width in pixels
examples/config/5x2panels8x12.flp 17) #   height: height in pixels
examples/config/5x2panels8x12.flp 18) size = 40,24
examples/config/5x2panels8x12.flp 19) 
examples/config/5x2panels8x12.flp 20) # configure distributors
examples/config/5x2panels8x12.flp 21) # syntax:
examples/config/5x2panels8x12.flp 22) #   distributor <distno> = <outputs>,<pixels>
examples/config/5x2panels8x12.flp 23) # description:
examples/config/5x2panels8x12.flp 24) #   distno: number of distributor
examples/config/5x2panels8x12.flp 25) #   outputs: number of outputs per distributor
examples/config/5x2panels8x12.flp 26) #   pixels: number of pixels per output
examples/config/5x2panels8x12.flp 27) distributor 0 = 32,96
examples/config/5x2panels8x12.flp 28) 
examples/config/5x2panels8x12.flp 29) # set address of distributor
examples/config/5x2panels8x12.flp 30) # if address is not set, default IP/UDP configuration is used:
examples/config/5x2panels8x12.flp 31) #   IPv4: 10.70.80.<distno>
examples/config/5x2panels8x12.flp 32) #   UDP port: 2323
examples/config/5x2panels8x12.flp 33) # syntax:
examples/config/5x2panels8x12.flp 34) #   distributorAddr = <IPv4>:<port>
examples/config/5x2panels8x12.flp 35) # description:
examples/config/5x2panels8x12.flp 36) #   IPv4: IPv4 address
examples/config/5x2panels8x12.flp 37) #   port: UDP port number
examples/config/5x2panels8x12.flp 38) distributorAddr 0 = 192.168.0.111:2323
examples/config/5x2panels8x12.flp 39) 
examples/config/5x2panels8x12.flp 40) # configure mapping between the color channel values in the video
examples/config/5x2panels8x12.flp 41) # and the values transmitted to the display
examples/config/5x2panels8x12.flp 42) # a mapping is configured per distributor and applies to all pixels
examples/config/5x2panels8x12.flp 43) # connected to it

examples/config/5x2panels8x12.etp 44) # RGB distributors use red, green and blue, monochrone distributors use white

examples/config/5x2panels8x12.flp 45) # syntax:

examples/config/5x2panels8x12.etp 46) #   mapping <distno> (red|green|blue|white) = <base> <factor> <gamma>

examples/config/5x2panels8x12.flp 47) # description:
examples/config/5x2panels8x12.flp 48) #   distno: number of distributor
examples/config/5x2panels8x12.flp 49) #   base, factor, gamma: floating-point values used in formula
examples/config/5x2panels8x12.flp 50) # mapping formula:
examples/config/5x2panels8x12.flp 51) #   display := base + factor * video ** (1.0 / gamma)
examples/config/5x2panels8x12.flp 52) # description:
examples/config/5x2panels8x12.flp 53) #   display: the value sent to the actual pixel connected to the distributor
examples/config/5x2panels8x12.flp 54) #   video: the color channel value taken from the video
examples/config/5x2panels8x12.flp 55) mapping 0 red = 0.0 1.0 1.0
examples/config/5x2panels8x12.flp 56) mapping 0 green = 0.0 1.0 1.0
examples/config/5x2panels8x12.flp 57) mapping 0 blue = 0.0 1.0 1.0
examples/config/5x2panels8x12.flp 58) 
examples/config/5x2panels8x12.flp 59) # specify logical positions of the pixels at distributor outputs
examples/config/5x2panels8x12.flp 60) # for each physical pixel, the source pixel in the video is specified
examples/config/5x2panels8x12.flp 61) # in video coordinates
examples/config/5x2panels8x12.flp 62) # syntax:

examples/config/5x2panels8x12.etp 63) #   output <distno>,<outno> = <px 1 x>,<px 1 y> <px 2 x>,<px 2 y> ...