# add setup G-code commands
cmd G21
cmd G90
cmd G64 P0.01
cmd G17
cmd G40
cmd G49

# configure settings
set_precision 0.01
set_tool_diameter 3
set_move_z 5
set_base_z 0
set_cut_z -3.2
set_cut_z_step 1.1
set_feed_drill 100
set_feed_mill 200
set_layer_mode path_by_path

# read drawing
read_dxf logo.dxf

# generate G-code for actual cutting
cut_inside holes
cut_outside border

# add finishing G-code commands
cmd M2

# write G-code to output file
write_ngc logo.ngc