BlinkenArea - GitList
Repositories
Blog
Wiki
dxfngc
Code
Commits
Branches
Tags
Search
Tree:
3f2ac59
Branches
Tags
master
dxfngc
examples
millme.txt
add support for cutting a layer path-by-path (i.e. each path all the way down, then next path)
Stefan Schuermans
commited
3f2ac59
at 2013-04-22 20:33:49
millme.txt
Blame
History
Raw
cmd G21 cmd G90 cmd G64 P0.01 cmd G17 cmd G40 cmd G49 set_precision 0.01 set_tool_diameter 3 set_move_z 3 set_base_z 0 set_cut_z_step 1 set_feed_drill 1000 set_feed_mill 2000 read_dxf millme.dxf set_cut_z -1 cut text set_offset_x 0.5 set_offset_y 0.3 cut text set_offset_x 0 set_offset_y 0 set_cut_z -2 cut_pocket pocket set_layer_mode path_by_path set_cut_z -2 cut_inside inner_test set_layer_mode level_by_level set_cut_z -2 cut_outside outer_test set_dwell_time 0.5 set_cut_z -3 cut_inside inner set_dwell_time 0 set_cut_z -3 cut_outside 0 cmd M2 write_ngc millme.ngc
