flaneth

1) # flaneth - flash and ethernet
2) # Copyright (C) 2007-2008 Stefan Schuermans <stefan@schuermans.info>
3) # Copyleft: GNU public license V2 - http://www.gnu.org/copyleft/gpl.html

4) # a BlinkenArea project - a BlinkenArea project - http://www.blinkenarea.org/

5) 
6) include Makefile.conf
7) 
8) # WinAVR Sample makefile written by Eric B. Weddington, J�rg Wunsch, et al.
9) # Released to the Public Domain
10) # Please read the make user manual!
11) #
12) # Additional material for this makefile was submitted by:
13) #  Tim Henigan
14) #  Peter Fleury
15) #  Reiner Patommel
16) #  Sander Pool
17) #  Frederik Rouleau
18) #  Markus Pfaff
19) #  Stefan Schuermans
20) #
21) # On command line:
22) #
23) # make all = Make software.
24) #
25) # make clean = Clean out built project files.
26) #
27) # make coff = Convert ELF to AVR COFF (for use with AVR Studio 3.x or VMLAB).
28) #
29) # make extcoff = Convert ELF to AVR Extended COFF (for use with AVR Studio
30) #                4.07 or greater).
31) #
32) # make program_fuses = Set the fuse bits of the device, using avrdude.  Please
33) #                      customize the avrdude settings below first!
34) #
35) # make program = Download the hex file to the device, using avrdude.  Please
36) #                customize the avrdude settings below first!
37) #
38) # make filename.s = Just compile filename.c into the assembler code only
39) #
40) # To rebuild project do "make clean" then "make all".
41) #
42) 
43) 
44) # MCU name
45) MCU = atmega128
46) 
47) # Output format. (can be srec, ihex, binary)
48) FORMAT = ihex
49) 
50) # Target file name (without extension).
51) TARGET = main
52) 
53) # Optimization level, can be [0, 1, 2, 3, s]. 0 turns off optimization.
54) # (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
55) OPT = s
56) 
57) 
58) # List C source files here. (C dependencies are automatically generated.)
59) SRC = $(TARGET).c
60) 
61) # If there is more than one source file, append them above, or modify and
62) # uncomment the following:

63) SRC += app_bbm.c app_cfg.c apps.c apps_tools.c \

64)        arp.c bus.c cf.c checksum.c config.c dhcp.c dosfs.c dosfs_user.c \

65)        eeprom.c ethernet.c http.c icmp.c ip.c random.c rtl8019.c \

66)        ser62500.c status.c tasks.c tcp.c timing.c uart.c udp.c \

67)        xtea.c
68) 
69) # You can also wrap lines by appending a backslash to the end of the line:
70) #SRC += baz.c \
71) #xyzzy.c
72) 
73) 
74) 
75) # List Assembler source files here.
76) # Make them always end in a capital .S.  Files ending in a lowercase .s
77) # will not be considered source files but generated files (assembler
78) # output from the compiler), and will be deleted upon "make clean"!
79) # Even though the DOS/Win* filesystem matches both .s and .S the same,
80) # it will preserve the spelling of the filenames, and gcc itself does
81) # care about how the name is spelled on its command-line.
82) ASRC = ser62500_asm.S
83) 
84) 
85) # List any extra directories to look for include files here.
86) #     Each directory must be seperated by a space.
87) EXTRAINCDIRS = 
88) 
89) 
90) # Optional compiler flags.
91) #  -g:        generate debugging information (for GDB, or for COFF conversion)
92) #  -O*:       optimization level
93) #  -f...:     tuning, see gcc manual and avr-libc documentation
94) #  -Wall...:  warning level
95) #  -Wa,...:   tell GCC to pass this to the assembler.
96) #    -ahlms:  create assembler listing
97) CFLAGS = -g -O$(OPT) \
98) -funsigned-char -funsigned-bitfields -fpack-struct -fshort-enums \

99) -Wall -Wstrict-prototypes -Wextra -Werror \

100) -Wa,-adhlns=$(<:.c=.lst) \
101) $(patsubst %,-I%,$(EXTRAINCDIRS)) \
102) $(DBG_FLAGS)
103) 
104) 
105) # Set a "language standard" compiler flag.
106) #   Unremark just one line below to set the language standard to use.
107) #   gnu99 = C99 + GNU extensions. See GCC manual for more information.
108) #CFLAGS += -std=c89
109) #CFLAGS += -std=gnu89
110) #CFLAGS += -std=c99
111) CFLAGS += -std=gnu99
112) 
113) # do not use C99 strict aliasing rules
114) #   this kills some warnings occuring when casting pointer types
115) CFLAGS += -fno-strict-aliasing
116) 
117) 
118) 
119) # Optional assembler flags.
120) #  -Wa,...:   tell GCC to pass this to the assembler.
121) #  -ahlms:    create listing
122) #  -gstabs:   have the assembler create line number information; note that
123) #             for use in COFF files, additional information about filenames
124) #             and function names needs to be present in the assembler source
125) #             files -- see avr-libc docs [FIXME: not yet described there]
126) ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs 
127) 
128) 
129) 
130) # Optional linker flags.
131) #  -Wl,...:   tell GCC to pass this to linker.
132) #  -Map:      create map file
133) #  --cref:    add cross reference to  map file
134) LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
135) 
136) 
137) 
138) # Additional libraries
139) 
140) # Minimalistic printf version
141) #LDFLAGS += -Wl,-u,vfprintf -lprintf_min
142) 
143) # Floating point printf version (requires -lm below)
144) #LDFLAGS += -Wl,-u,vfprintf -lprintf_flt
145) 
146) # -lm = math library
147) LDFLAGS += -lm
148) 
149) 
150) 
151) # rebuilding is required if one of the following files is changed
152) REBUILD_DEPS = Makefile.conf
153) 
154) 
155) 
156) # Programming support using avrdude. Settings and variables.
157) 
158) # Programming hardware: alf avr910 avrisp bascom bsd 
159) # dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
160) #
161) # Type: avrdude -c ?
162) # to get a full listing.
163) #

164) AVRDUDE_PROGRAMMER = stk200
165) #AVRDUDE_PROGRAMMER = avrisp2

166) 
167) 
168) #AVRDUDE_PORT = com1	# programmer connected to serial device
169) #AVRDUDE_PORT = lpt1	# programmer connected to parallel port

170) AVRDUDE_PORT = /dev/parport0
171) #AVRDUDE_PORT = usb